somebody help me out with Santa Cruz dread measurements

[darylcrisp]

if my memory is correct, i think the SC body of the dread build is slightly smaller than a Martin-correct?

i looked on the SC website and i did not find the body length, depth at endpin, lower bout width. i may have missed it if its there-years ago i think they listed those specs.

if anyone knows where those specs can be found, please post the link here-or if you have a SC dread handy and don't care to measure body length, depth at endpin, and lower bout width, post those here.

thank you
d

[brencat]

That's correct Daryl. Here you go -- from my collection, hope this helps:

Martin dread (2021 D-28CAA)

Upper bout width: 11.5"
Lower bout width: 15.625"
Depth at neck heel: 3.875"
Depth at tail: 4.875"
Overall body length: 20"

Santa Cruz D/PW (2012)

Upper bout width: 11.125"
Lower bout width: 15.5"
Depth at neck heel: 3.625"
Depth at tail: 4.625"
Overall body length: 20"

Santa Cruz 1934D (2011)

Upper bout width: 11"
Lower bout width: 15.5"
Depth at neck heel: 3.5"
Depth at tail: 4.5"
Overall body length: 20"