#1
|
|||
|
|||
G7th mark 2 Problems
Mine doesn't work. The version 1 was slightly disappointing but this is worse. No matter how I position it, how hard I press it will not hold all the strings at the first fret and its not that much better further up the neck.
Last edited by M19; 12-07-2016 at 05:17 PM. Reason: de-trolled the title |
#2
|
||||
|
||||
G7th is fantastic with customer service, so you should contact them first to see what's going wrong.
I've had a G7th Performance and a G7th Performance-2 and a G7th Heritage. They've all worked perfectly. In getting to know the products and company, I've written reviews here on AGF and read a lot of reviews. From what I've read and experienced it is highly surprising that you would have two bad products in a row. Can you maybe give some more specifics? What kind of guitar are you using? Can you post a pic or video of your problem?
__________________
Fazool "The wand chooses the wizard, Mr. Potter" Taylor GC7, GA3-12, SB2-C, SB2-Cp...... Ibanez AVC-11MHx , AC-240 |
#3
|
|||
|
|||
Maybe just squeeze a little harder? Both my G7th capos, old Performance and new Performance 2, work well.
__________________
Martin HD-28 Sunburst/Trance M-VT Phantom Martin D-18/UltraTonic Adamas I 2087GT-8 Ovation Custom Legend LX Guild F-212XL STD Huss & Dalton TD-R Taylor 717e Taylor 618e Taylor 614ce Larrivee D-50M/HiFi Larrivee D-40R Blue Grass Special/HiFi Larrivee D-40R Sunburst Larrivee C-03R TE/Trance M-VT Phantom RainSong BI-DR1000N2 Emerald X20 Yamaha FGX5 Republic Duolian/Schatten NR-2 |
#4
|
|||
|
|||
I'm with you on this, ended up giving the thing away and went back to using my ol Keyser.
|
#5
|
|||
|
|||
I'm nothing to do with G7th but I have one of their capos which works perfectly anywhere on the neck. This prompted me to ask whether your action may be a bit high at the nut. Just a thought, and of course if that's how you like your instrument set then maybe those capos are not for you, but if you think you would like to get to know one better it could be something to consider. It'd make your guitar easier to play as well.
|
#6
|
||||
|
||||
Mine works flawlessly. I love my Elliott too, but frankly, at the G7th 2 price point and with one handed operation, I reach for the G7th first.
Last edited by M19; 12-08-2016 at 05:09 AM. Reason: reference to edited title |
#7
|
|||
|
|||
I have a G7th Performance 2 and it works fine. I would contact customer service and see what you can determine might be the problem. I always reach for my Elliott but I use a G7th on one of my parlors. It just seems to fit that guitar.
Best, Jayne |
#8
|
|||
|
|||
mine works fine,
maybe you were unlucky and got a dud |
#9
|
|||
|
|||
The new version is a thing of beauty but my experience is that it does not function satisfactorily. I can assure all those who like it and wish to give me advice that I have tried litterally everything. I have a Taylor and a Lowden, nothing with extraordinary specifications. The old G7th is okay-ish. But I the ones that really work fine are my Shubbs.
Last edited by M19; 12-08-2016 at 05:09 AM. Reason: reference to edited title |
#10
|
|||
|
|||
The capo I have is a cheap piece of junk, but it works. What exactly is it that some mean when they say they don't work ?
Before we wholesale trash a product, let's go through the normal channels of customer service. This may be a dud, but may also turn away others from purchasing one in the future. Do they fail while bending strings, strumming hard or ? Dan |
#11
|
|||
|
|||
that's surprising...i have two of the original G7th's .... bumped everyone else out.
__________________
2013 Custom Shop Martin 000-18 1974 Martin D 28 2001 Taylor 314CE 1990 Alvarez DY-50 2019 McPherson Sable Godin A6 Ultra lots of electrics and amps! |
#12
|
|||
|
|||
I too am with you on this. I wanted to give it a go, and I can use it, but it is always a hassle position, reposition, squeeze and squeeze again. It's lying about now, went back to my trusted Shubbs. The're always spot on!
__________________
Larrivee D10 (2003) Larrivee OM10 RX Moonspruce (2018) Martin HD28V (2014) Taylor K62ce 12-fret LTD 12-string (2016) Taylor GSmini-e Rosewood (2014) Gibson J45 Standard Vintage Sunburst (2016) Ovation Custom Elite CE778 (2002) |
#13
|
|||
|
|||
Another satisfied G7th customer. I'm not minimizing your problem, but there might be a problem with the specific capo. I have 3 G7th capos and all work flawlessly.
__________________
"Lift your head and smile at trouble. You'll find happiness someday." |
#14
|
|||
|
|||
I'm also very happy with my G7th Performance 2.
So one thing that might help - assuming you actually want help, and not just to vent - is to squeeze the capo shut from the open end, not the hinge end. The basic principles of a lever apply. Squeezing the hinge-side tight won't get the open-side quite as tight, but squeezing the open side tight will tighten the hind side. So if you attack the capo with the hinge on the low-E side of the fretboard, squeeze the far end, over the high e string. See if that doesn't help. |
#15
|
|||
|
|||
I will echo the encouragement to reach out to G7th customer service. I've never needed them, but only hear good things.
I have several G7th capos (one in each case) and find they work really well. |