#1
|
|||
|
|||
Mixed woods for back and sides
I just had the question pop into mind – has anyone tried to use different woods for the sides and back of a guitar? Or would that just add unnecessary complexity to trying to build a guitar?
__________________
Sachi Kolaya Carmen, Trek parlor (by Harv L), Martin 000-28EC, Taylor GC-5 and 355. |
#2
|
|||
|
|||
I've done it on a quick prototyping guitar. No reason not to other than tradition/appearance.
|
#3
|
||||
|
||||
I have seen half Mahogany half spruce tops. Backs not matching sides. One side matching the one side of the back . And so on. I think they look neat. I am not sure what any of them sounded like
|
#4
|
|||
|
|||
I've got one on working on with a cocobolo back and curly maple sides.
Jim McCarthy |
#5
|
|||
|
|||
I hadn't thought of that! You could pick and mix to make subtle changes to the tonal signature. Obviously the sides don't make as much difference as the back, but you could use say rosewood for the back and mahogany sides. Hmm, then as someone said, two different boards for the top. Interesting..
__________________
Experienced guitar tech and singer/guitarist based in the midlands, England. McIlroy AJ50 Yamaha CPX-1200 Yamaha CPX-700/12 Yamaha LS16 Yamaha FG-300 Yamaha FG-580 Vox V2000-DR + electric guitars.. |
#6
|
|||
|
|||
Martin has the MTV multi wood.....
http://www.elderly.com/new_instruments/items/MTV2G.htm http://www.youtube.com/watch?v=Sl4bt32TT5s
__________________
D'ya like my red dot.... |
#7
|
|||
|
|||
__________________
Happy moments! Difficult moments! Quiet moments! Painful moments! Every moment! Thankful for something bigger than the internet to express my gratitude for living "If I cannot do great things, I can do small things in a great way.” ~Martin Luther King Jr. |
#8
|
|||
|
|||
Quote:
Fabulous work from Howard.
__________________
Sachi Kolaya Carmen, Trek parlor (by Harv L), Martin 000-28EC, Taylor GC-5 and 355. |
#9
|
|||
|
|||
Resurrecting this one...
Looking through my wood inventory for what to use on the next OM, I'm seeing enough zebrawood for a back. Enough plantation teak for backs and sides, Plenty of pecky Bolivian walnut. But how would any of that sound? I have no idea. Pecky Bolivian walnut on the sides or back??? |
#10
|
|||
|
|||
The back has far less influence on the sound then the top, and the sides far less then the back. From what I can tell, the most important wood properties in the back as regards sound are the density and damping factor, so if those are 'close' there won't be much difference with mixed woods. Soft maple and black walnut, for example, have very similar properties, and I recently made a fiddle with half the back in maple, and the other half walnut, that works fine.
|
#11
|
|||
|
|||
Quote:
I hope you’ll post pictures. |