#1
|
|||
|
|||
Armrest (or other solutions) for archtop with sharp edge
I have an Eastman 910CE - it's super cool, but the binding has a quite sharp edge that dig into my picking arm when I play. I encountered that already with flattops, and the way I'd solve this would be to put a John Pearse arm rest which has been working great so far.
BUT: I cannot do that with the archtop, as none of their armrests really fits the shape. So I started googling for archtop armrest, but really didn't not find much. The only seems to be this one here which I am going to try. Any recommendation for armrest on archtop? Also, perhaps a crazy question, could a tech/luthier smooth out the binding and add a bevel? Ciao, Ll.
__________________
2015 Martin OM-28 1931 Authentic 2018 Martin CEO-7 2021 Taylor GS Mini Mahogany 2022 Logan Custom Telecaster 2023 Eastman 910CE-TC |
#2
|
|||
|
|||
My two solutions aren't likely to resonate with you but I would, stop resting my arm on the side of the guitar. Or, get a piece of sandpaper and smooth the sharp edge of the guitar until it is more comfortable. After 20 years of play the edge will get worn down anyway.
__________________
Don't get upset, it's just my experienced opinion, Steve |
#3
|
|||
|
|||
Aaaaaaahhhhh!!!
....jk Instead of smoothing it myself I'd bring it to a tech (actually I'll ask them next Friday). As per changing posture: I don't rest my arm on the top, but keep the archtop guitar angled towards me because that gives me the angle I need to get then tone I want when I pluck strings with my fingers. Because of the angled position, the binding edge of the body presses towards my chest and the front towards my arm. Ll.
__________________
2015 Martin OM-28 1931 Authentic 2018 Martin CEO-7 2021 Taylor GS Mini Mahogany 2022 Logan Custom Telecaster 2023 Eastman 910CE-TC |
#4
|
|||
|
|||
I use a padded protective sleeve that you put on your arm, so the edge of the guitar doesn't bother you.
__________________
2023 Loef 00 13 fret 2018 Loef Dread SS 12 fret 1972 Yamaha FG-75 Red Label 1959 Höfner 456/S |