Quote:
Originally Posted by RB3
CA and Peavey installed Graph Tech TUSQ nuts and saddles on these guitars from the factory. Might be worth a phone call to Graph Tech to see which spec nuts & saddles they supplied to CA/Peavey and if they still manufacture ones to those dimensions. Check the Peavey-made guitar to see if it's the narrow neck (1.69" nut) or wide neck (1.75" nut). Most pre-Peavey guitars have the wider 1.75" nut.
|
Just a followup to your suggestion. I ended up calling Peavey and Chris there was very helpful. It turns out they still have some nuts and saddles in stock for most of the Composite Acoustic models they made, so I ordered each. My GX has the 1.75” nut width. Btw, Titebond epoxy was used to glue the nut on their “forever” carbon fiber guitars…which adds a bit more of a challenge with replacing the original one.